User manual

DWG2000-16G User Manual
_______________________________________________________________________________
Dinstar Technologies Co., Ltd.
19
4.5Network Configuration
4.5.1 Local Network
Figure 4-5-1 Local Network
Table 4-5-1 Description of Local network
Obtain IP Address
Automatically
Enable the device obtain IP Address automatically or not. Default is
enabling
Use the Following IP
Address
Configure the "IP Address", "Subnet Mask" and "Default Gateway"
by manual
PPPoE
Need ISP offer the account and password. Use this mode when there
is not router in the local network.
Obtain DNS Server
Address Automatically
When enable the WAN port option of "Obtain DNS Server Address
Automatically" , which will be enabled subsequently.
Use the Following DNS
Server Addresses
Fill in the IP address of "Primary DNS Server" and "Secondary DNS
Server"