User manual

DWG2000C-4/8G User Manual
37 / 51
Example
To add a remote IP of Softswitch, set “index” to “31”, SIP port number “5060”
Figure 4-11-2 IP Trunk Modify
4.11.2 IP Trunk Group
Figure 4-11-3 IP Trunk Group
Table 4-11-2 Description of IP Trunk Group
Example
To add an IP group, set IP “10, 14, 17” to IP group 18
Figure 4-11-4 IP Trunk group modify
IP Trunk Group
This configuration is optional, and is used to add the IP that have the same
attributes to an IP group. The IP group will referenced by IP->Tel routing and
number manipulation.
Index
It uniquely identifies a route. Its value is assigned globally, ranging from 0 to
31.
Description
It describes the route for the ease of identification. Its value is character string
IP
It specifies the IP will add to IP group