User's Manual
• Power Rating MAX2400W
• Rated Intput AC 110V-240V/50-60Hz/MAX10A
• Rated Ouotput AC 110V-240V/50-60Hz/MAX10A
• Distance 300 m
• Transmission Frequency 433.92MHz
• Working Temperature -10
℃
~50
℃
• Humidity ≤90%rh (non-condensing)
• Weight 88.7 g
• Dimension 102*62.5*29.7 mm ( L*W*H)
Features
Parameters
Appearance
The smart plug is an accessory of smart alarm system. It is easy and reliable to use with elegant design. The smart plug could
be controlled remotely by App. By the “Follow Me” feature of the system, the smart plug could also be automatically turned
ON/OFF according to system or accessory events, or by preset time schedule.
LED Indicator
Power/Reset Button
* We oer Smart Plug in global standards like CEE, GB, SAA, FC, etc.
CEE standard is used for reference only in this document.
Pairing With Main Panel by App
Use The Smart Plug
1. Make sure your Smart Plug is plugged into the outlet. Check the LED indicator if it is ON.
If not, press the power button to ensure the smart plug has been turned ON.
2. Launch App. Scan the QR Code printed on the smart plug. Finish the rest parts like
renaming, etc.
3. PRESS [SAVE] on App. The pairing would be finished when the LED indicator blinks
several times. The system would inform you the pairing result by APP.
Hint: The main panel and the smart plug should be ON during the whole pairing process.
1. Turn ON/OFF.
In the App , you could easily turn ON/OFF by tapping buttons in the Smart Plug section or
in the main control panel.
2. Setup Follow Me Strategy or Time Schedule
Smart plug could be automatically turned ON/OFF according to the system or accessory
events, like ARM/DISARM/ALARM/TRIGGERED/TIME SCHEDULE etc. Users could easily
setup these strategies in App, click the name in the Smart Plug List to modify settings.
3. Reset The Smart Switch
Keep holding the reset button in 10 seconds, the smart switch would be reset as the LED
indicator keep flashing.