User`s manual

Dino Digital Microscope User’s Manual

9 Graphic card: 16-bit or above

9 CD-ROM driver

9 Sound card and speaker

9 USB2.0 / 1.1 port (to have better image, USB2.0 is recommended)

● Device needed: Dino Digital Microscope Device, Rack, CD-ROM, 5V AC Adaptor,

USB Cable, AV to Microphone Jack Cable, Inspection Plate.

Driver Installation Procedure

■ Power on PC and place installation CD into CD-ROM driver, do not connect

USB Cable from Dino Digital Microscope to PC before driver installation.

■ Select driver installation, and follow the instructions to complete installation.

■ As driver installation completed, and if system asking for re-start, please

re-start the Windows OS.

Note: The driver needs to be installed only once for each computer.

Windows XP

1. Place the installation CD into CD-ROM driver, the installation program should be

started automatically. Otherwise, please execute the AUTORUN.EXE directly

from the CD.

2. Select “Driver Installation” from Dino digital Microscope Installation menu

screen as shown.