Instructions

www.ideal-tek.com
Switzerland
10
Dino-Lite User manual
ENGLISH
Measurement options
MEASUREMENT PROPERTIES
Organize and show the status of all the measure-
ments as well as the ability to adjust how the results
are shown on the image.
MAGNIFIER
Digitally enlarge the area around your mouse point-
er for more details and accurate measurements.
MAGNIFICATION
Input the magnication in the blue box. The mag-
nication can be read from the dial on the micro-
scope.
UNITS
Select the unit of measurement, inch, mil, m or um.
CALIBRATION MENU
Select calibration, create new calibration prole or
open the calibration folder.
BARCODE READER
Click on the icon to enable and disable barcode
detection.
PREVIEW WINDOW TOOLS
Microtouch - This is activated when you touch the Microtouch sensor. Acti-
vate or deactivate the Microtouch. Some Dino-Lite models do not have this
feature.
Auto Exposure – This allows you to change the exposure or turn off auto
exposure. Sliding the bar to the right increases the exposure time and vice-
versa.
White Balance - Select the required White Balance Mode (available on cer-
tain models only)