Manual

VERTICAL MOUNTING

Installation and adjustment of the vertically mounted brake is the same as on the standard model.

Friction Disc Replacement

When replacing friction discs, follow procedure outlined on page 5 with this addition:

Care must be taken to insure proper insertion of disc separating springs. Springs are color coded for easy identification, and

reference is made to spring color (see Table 1 and Figure 9). Since the installation order of the disc springs is dependent on

brake mounting position (VO= vertical over or above motor; VU= vertical under or below motor), it is important to consult the

correct diagram for spring location.

Table 1 Parts for Vertical Mounting

Figure 9

Item

No.

Description Part No.

Qty. of Parts

(No. of rotating discs)

1 2 3 4

FOR MODELS 4-60000-530 & 6-60000-543

1 Bracket, 1 & 2 disc models, VO L060266-011 1 1

1 Bracket, 3 disc model, VO L060266-012 1

1 Bracket, 4 disc model, VO L060266-013 1

1 Bracket, 1 & 2 disc models, VU L060266-021 1 1

1 Bracket, 3 disc model, VU L060266-022 1

1 Bracket, 4 disc model, VU L060266-023 1

- Cover with drain, VU (not shown) K060465-011 1 1 1 1

FOR MODELS 6-60000-5116 & 6-60000-5115

1 Bracket, 1 & 2 disc models, VO L060266-041 1 1

1 Bracket, 3 disc model, VO L060266-042 1

1 Bracket, 4 disc model, VO L060266-043 1

1 Bracket, 1 & 2 disc models, VU L060266-051 1 1

1 Bracket, 3 disc model, VU L060266-052 1

1 Bracket, 4 disc model, VU L060266-053 1

- Cover with drain, VU (not shown) K060465-031 1 1 1 1

FOR ALL MODELS

2 Stationary disc, vertical mounting H060203-004 1 2 3 4

3 Compression spring (silver) G060350-001 2 2 2

4 Compression spring (black) G060350-002 2 2

5 Compression spring (bronze) G060350-003 2

6 Flotation spring (silver) G060736-001 2

7 Flotation spring (black) G060736-002 2

8 Flotation spring (bronze) G060736-003 2

9 Flotation spring (red) G060736-004 2

10 Roll pin, 1/8” dia. x 5/8” lg. W005003-071 2

11 Roll pin, 1/8” dia. x 1” lg. W005003-077 2

12 Roll pin, 1/8” dia. x 1-3/8” lg. W005003-080 2

13 Roll pin, 1/8” dia. x 1-3/4” lg. W005003-083 2