Owner manual

VERTICAL MOUNTING

Installation and Adjustment

Installation and adjustment of the vertically mounted brake

is the same as on the standard model.

Friction Disc Replacement

When replacing friction discs, follow procedure outlined

on page 5 with this addition:

Care must be taken to insure proper insertion of disc

separating springs. Springs are color coded for easy

identification, and reference is made to spring color (see

Fig. 8 and 9). Since the installation order of the disc springs

is dependent on brake mounting position (above or below

motor), it is important to consult the correct diagram for

spring location.

Qty. of Parts

(determined by no. of

Item Part rotating discs)

No. Description No. 1 2 3

1 Spring (silver) G060350-001 2 2 2

2 Spring (black) G060350-002 - 2 2

3 Spring (bronze) G060350-003 - - 2

4 Roll pin - 1/8” x 5/8” W005003-071 2 - -

5 Roll pin - 1/8” x 1” W005003-077 - 2 -

6 Roll pin - 1/8” x 1-3/8” W005003-080 - - 2

7 Stationary disc H060203-003 1 1 1

8 Stationary disc H060203-004 1 2 3

9 Adapter housing with drain L060393-003 1 1 1

for Models VU6-60000-5155

only (not shown)

Figure 8 Parts for Vertical Mounting

Figure 9