Owners Manual

11
Fireplace Installation (continued)
Figure 7
Partially
Reective Glass
Partially Reective
Glass Bracket
Media Tray
To wire through a wall switch:
1. Cut the wire to an appropriate
length.
2. Connect the L wire from the
unit to the live wire from the
main power through the
wall switch, ensuring all live
connections are connected with
a wire nut.
3. Connect the N wire from the
unit to the neutral wire from the
power supply with a wire nut.
Glass
Openings
4. Connect the G wire from the
unit to the ground wire from the
power supply with a wire nut
or attach the grounding wire
to the cover with the provided
grounding screw, by placing the
wire in-between screw and lock
washer and tighten (Figure 3).
5. Ensure that all wires are secure
and do not protrude past the
ame panel, so as not to be
visible after nal assembly.
6. Continue to the nal assembly
instructions.