How to Guide

www.dimplex.com 11
Electrical
120V Installation - Direct
Wire
CAUTION: Use the appropriate
wire to meet local and national
electrical codes for rated power
consumption.
To 120V direct wire:
1. Cut the wire to an appropriate
length.
2. Connect the L wire from the unit
to the live wire from the power
supply with a wire nut.
3. Connect the N wire from the
unit to the neutral wire from the
power supply with a wire nut.
4. Connect the G wire from the
unit to the ground wire from the
power supply with a wire nut
or attach the grounding wire
to the cover with the provided
grounding screw, by placing the
wire in-between screw and lock
washer and tighten (Figure 4).
5. Make sure all wires are secure
and do not protrude past the
ame panel, so as not to be
visible after nal assembly.
6. Continue to the nal assembly
instructions.
120V Installation - Wall
Switch
!
NOTE: Use a single pole, single
throw (On/O󰀨) wall switch that is
rated for a minimum of
15 amps.
CAUTION: Use the appropriate
wire to meet local and national
electrical codes for rated power
consumption.
To wire through a wall switch:
1. Cut the wire to an appropriate
length.
2. Connect the L wire from the unit
to the live wire from the main
power through the wall switch,
ensuring all live connections
are connected with a wire nut
(Figure 7).
3. Connect the N wire from the
unit to the neutral wire from the
power supply with a wire nut.
4. Connect the G wire from the
unit to the ground wire from the
power supply with a wire nut
or attach the grounding wire
to the cover with the provided
grounding screw, by placing the
wire in-between screw and lock
washer and tighten (Figure 4).
Fireplace Installation