Replacement Part List

Demo Mode

Certain versions of this rebox are equipped with a demo

mode where the unit cycles through several functions. The

demo mode is activated by pressing and holding the tem-

perature and brightness buttons for 2 seconds. In demo

mode, the display remains lit and none of the remote or on-

unit controls work. When power is cut to the unit and then

restored, the unit remains in demo mode.

Icon Function Description

F Brightness

Press to change the ame and logs brightness. Display will show b3, b1, b2

respectively.

• High

• Low

• Medium

G Flame

Press to turn the ame e󰀨ect On. Press again to turn the ame e󰀨ect O󰀨.

H Timer

Press multiple times to change the sleep timer by 0.5 hr from 0.5 hr to 8 hr before

turning o󰀨. Press again, the remaining time on the timer displays.

Resetting the Temperature Cutout Switch

Should the heater overheat, an automatic cutout will turn

the heater o󰀨. It will not come back on without being reset.

To reset the cutout switch, unplug the unit and wait 5

minutes before plugging it back in.

CAUTION: If you need to continuously reset the heater,

unplug the unit and call Technical Support at 1-888-346-7539