Instruction Manual

16 www.dimplex.com
Operation
A. On Button
Pressing this button toggles
sequentially through the three
levels of the replace. Pressing
once activates Level 1 - ame
effect only, twice activates Level 2
- ame effect and Purire™, three
times activates Level 3 - ame
effect, Purire™ and heat.
B. Off Button
Pressing this button at any time
will shut the unit off.
C. Manual Selection Switch
Switches the operation of the
replace between the different
modes of the replace:
OFF (center): Makes the unit •
inoperable.
MANUAL (top): All functions •
of the replace are controlled
by the On and Off buttons as
described above (A, B).
REMOTE (bottom): All •
functions of the replace are
controlled by the Wall Switch
Remote Control.
D. LED Indicators
Depicts which of the three (3)
levels the replace is currently
operating at: Level 1 - ame effect
only; Level 2 - ame effect and
Purire™; Level 3 - Flame effect,
Purire™ and heat.
!
NOTE: The third LED (Level 3)
on receiver board will always
be illuminated when the
Manual Selection Switch is set
to REMOTE. The only time
that the LED is turned off is
when the thermostat is set to
“Heat Off”.
Figure 20
A B C
D