Technical data

SOLC220 - Free standing kit
Page 15 of 20
ST0117 – C 08/09
SOLAR
Step 2.7.1 Collector
- Attach the collector (1) to the front U-
pieces (3.1).
- To do so, position the collector with the
help of a second person.
- Attach the T-pieces (4.1) to the U-
pieces using M10 hexagonal bolts (3.6),
large spacer sleeves (3.9), spring wash-
ers (3.7) and M10 hexagonal nuts (3.8).
Step 2.7.2 Collector
- Slowly tilt the collector (1) towards
the supporting tubes (2).
- Attach the T-pieces using M10 hex-
agonal bolts (3.6), large spacer
sleeves (4.3), spring washers (3.7)
and M10 hexagonal nuts (3.8).
- Fasten all four T-pieces in place by
tightening the M10 hexagonal bolts.