SDS

TMMQ/GPTD-PS/A00
Guangzhou Tianqiu Enterprise Co., Ltd
We reserve all rights for the change of product specification and any information without any prior notice. Page 5 of 10
5.2.4
Over-discharge
Continuously discharge at 15KΩ
to 1.2V
No leakage,no deformation;
N=9, Ac=0, Re=1
5.2.5
High
Temp.storage
Storage the samples at 60℃,RH
below 70% for 30 days
No leakage;
N=40, Ac=1, Re=2
5.2.6
Short circuit test
Short circuit at 55℃.Continued
the test at least 1 hour after the
cell external case temperature
has returned to 55℃.
No explosion, no fire;
N=5，Ac=0，Re=1.
5.2.2 Acceptance test:
1) 9 pieces of battery will be tested for each discharging method.
2) The average discharging time from each discharging method shall be equal to
or greater than the specified figure, and no more than one battery has a
service output less than 80% of the specified figure.
3) One retest is allowed to confirm the results if the first test did not meet the
requirements.
5.3 Shelf life
One year after delivery under normal storage conditions according to appendix E of
GB/T 8897.1-2013.
6．Packing and Marking
Any specific design and packing requirements will be accommodated as enquired.
But as a general, the following markings will be printed, stamped or impressed on
the body of the battery: