Installation Guide

11
Power Cord
WARNING: Install the power cord
so that it is stored or secured to avoid
tripping or snagging and to reduce the
risk of re, electric shock, or injury to
persons.
WARNING: This replace is
for use on a 120V circuit and has a
grounding plug that looks like the plug
in Figure 1. Make sure the plug is
connected to an outlet having the same
conguration as the plug. No adapter
should be used with this product.
WARNING: Do not use this
replace with an extension cord. Plug
the cord directly into an ap propriate
wall receptacle.
Electrical
Removing Power Cord for
Hardwire Installation
To remove the power cord:
1. Locate the power cord on the back
of the fireplace. Remove 2 screws
and slide the electrical box back.
2. Unscrew the 2 wire connectors.
3. Cut the green (ground wire) leaving
enough length to reuse the wire.
4. Replace assembly with the hardwire
cover (included).
Figure 1