Instructions / Assembly

18 www.dimplex.com
Factory Reset
Press and hold
and at the same time for 3 seconds to reset all the settings to
factory default. This action will also disconnect the unit from the Wi-F network if
connected. This action must be performed on the hidden touch controls.
Resetting the Temperature Cutoff Switch
Should the heater overheat, a manual limit cut-out will turn the unit off and it will not come back on without being
reset. If the button on the unit is pressed, Err 1 will be displayed on the unit. It can be reset by turning the unit off
at the main disconnect panel and waiting 30 minutes before turning the unit back on.
CAUTION: If you need to continuously reset the heater, turn the unit off at the main disconnect panel and call
technical support at: 1-888-346-7539.
Operation