Instructions / Assembly

15
Installation
Figure 17
Front Glass Installation
1. Ensure there are no debris or nger prints on the mirrored
glass or on the back of the front glass before you begin.
2. Secure the provided suction cup on the front glass,
ensuring it cannot be pulled off.
3. Lift the glass using the suction cup, and align the
4 mounting brackets on the front glass with the
corresponding slots on the replace.
4. Insert the mounting brackets into the slots and gently
release the glass so that it may drop into its nal position.
5. Remove the suction cup and clean any ngerprints or
debris off the front glass with a nonabrasive glass cleaner.
!
NOTE: Do not dispose of the suction cup! Keep it in a
secure location, as it may be needed for maintenance and
service on this replace.