Technical data

www.dimplex.de/en
98
2010
Connection voltage 1/N/PE ~230 V, 50 Hz
Under tile mats set HM…TS set BT
with floor temperature controller BT 401 UN
HM ... TS Set BT
Ready for installation and connection, heating pipe with protective jacket for connecting to the fault current protective switch, heating
pipe made of resistance alloy according to DIN 17470 and/or DIN 17471 with teflon insulation, surface-related consumption 150 W/m2,
heating pipe diameter approx. 4 mm, attached to plastic fabric with one-sided cooling pipe 4 m to simplify installation,
installation width 0. 5 m, VDE certification according to EN 60335-2-96 with
Electronic floor temperature controller BT 401 UN
operating voltage: 230 V, 50 Hz; switching capacity: 16 (2) A at 230 V (NO contact); controlling range 10 °C to 50 °C; standard NTC sensor,
4 m cable length, sensor element Ø 7 x 28 mm with flat switch mounting frame for flush mounting as standard, can be installed in
virtually all flat switch programs using an adapter element (50 x 50 mm according to DIN 49075) provided by the flat switch program
manufacturer, thermostat dial, temperature range limitation integrated in the casing cover, ON/OFF program switch, LED display for
heating and temperature lowering, temperature lowering by remote control (approx. 5 K), sensor monitoring, colour alpine white, IP 30,
dimensions in mm(W x H x D) 81. 5 x 81. 5 x 42. 5 (height 16 mm mounted in flush box).
Order reference Art.-Nr. Rated power
W
Surface-related
consumption
W/m2
Width
m
Length
m
Surface area
m2
HM 150 TS Set BT 351060
150 W
150 W/m2 0.5 m
2 m 1.0 m2
HM 225 TS Set BT 350840
225 W 3 m 1.5 m2
HM 300 TS Set BT 350850
300 W 4 m 2.0 m2
HM 450 TS Set BT 350860
450 W 6 m 3.0 m2
HM 600 TS Set BT 350870
600 W 8 m 4.0 m2
HM 750 TS Set BT 350880
750 W 10 m 5.0 m2
HM 900 TS Set BT 350890
900 W 12 m 6.0 m2
Heater mat installation width, comprises of the heater mat width and the installation clearance. Heater mat can be installed variably on site.
Heated area, comprises of the heater mat width and the installation clearance .
HM 150 TS Set BT 351060 4015627351066
HM 225 TS Set BT 350840 4015627350847
HM 300 TS Set BT 350850 4015627350854
HM 450 TS Set BT 350860 4015627350861
HM 600 TS Set BT 350870 4015627350878
HM 750 TS Set BT 350880 4015627350885
HM 900 TS Set BT 350890 4015627350892
Installation accessories for HM...TS
KED TS Set
Order reference Art.-Nr. Features
KED TS Set 344010
Cooling pipe extension for the TS heater mats with protective earthing connection, 1.0 mm2,
length 10 m, 10 connection sleeves. Only required when the 4 m long cooling pipes connected to the
mats via sleeves are not long enough.
NHD 100 319620
Special retaining dowels for fixing the heater mats to a surface, 100 pieces, length approx. 25 mm.
KED TS Set 344010 4015627344013
NHD 100 319620 4015627319622
Connection voltage 1/N/PE ~230 V, 50 Hz
Under tile heating mats HM … SF
to be installed directly in the tile adhesive or the levelling
HM ... SF ...
Ready for installation and connection, heating pipe with protective jacket for connecting to the fault current protective switch, heating
pipe made of resistance alloy according to DIN 17470 and/or DIN 17471 with teflon insulation, surface-related consumption 150 W/m2,
additional installation height ca. 5 – 8 mm, heating pipe diameter approx. 2. 9 mm, attached to plastic fabric with two cooling pipes of
4 m each, installation width 0. 9 m, VDE certification.
Order reference Art.-Nr. Rated power
W
Surface-related
consumption
W/m2
Width
m
Length
m
Surface area
m2
HM 150 SF 150-5 335580
150 W
150 W/m2
0.5 m
2 m 1.0 m2
HM 300 SF 150-5 336280
300 W 4 m 2.0 m2
HM 450 SF 150-5 336300
450 W 6 m 3.0 m2
HM 180 SF 150 326140
180 W
0.9 m
1.3 m 1.2 m2
HM 410 SF 150 330260
410 W 3.1 m 2.7 m2
HM 1130 SF 150 326170
1130 W 8.5 m 7.5 m2
Heater mat installation width, comprises of the heater mat width and the installation clearance. Heater mat can be installed variably on site.
Heated area, comprises of the heater mat width and the installation clearance.
phase out
HM 150 SF 150-5 335580 4015627335585
HM 300 SF 150-5 336280 4015627336285
HM 450 SF 150-5 336300 4015627336308
HM 180 SF 150 326140 4015627326149
HM 410 SF 150 330260 4015627330269
HM 1130 SF 150 326170 4015627326170
Floor heating systems
Installation accessories for HM … SF
KED SF Set
Order reference Art.-Nr. Features
NHD 100 319620
Special retaining dowels for fixing the heater mats to a surface, 100 pieces, length approx. 25 mm.
KED SF Set 336560
Cooling pipe extension for heater mat system HM ... SF with protective jacket, 1.0 mm2, 10 m long
blue, 10 m black, 10 connection sleeves.
KED 1010 SF 329850
Cooling ends extension for HM ... SF, with protective jacket, 1.0 mm2, length 10 m, black.
phase out: KED SF Set, KED 1010 SF
NHD 100 319620 4015627319622
KED SF Set 336560 4015627336568
KED 1010 SF 329850 4015627329850