Technical data

www.dimplex.de/en
66
2010
Solar hot water cylinders
Solar hot water cylinders
for heat pumps
WWSP 432 SOL
Solar domestic hot water cylinder made of steel (special enamelling inside) with protection anode, two internal bare-tube heat exchan-
gers for solar and heating, thermometer, polyurethane insulation for minimal stand-by losses, colour white, TK150/DN110 flange.
Permissible operating pressure 10 bar;
Order reference Art.-Nr. for device type Features Diameter x Height
mm
Weight
kg
WWSP 432 SOL 361080
up to LI 20
excluding LI 16
up to LA 22
excluding LA 16 / LA 22HS
up to SI 11
up to WI 14
400 l nominal volume, 346 l usable
capacity, 3.2 m² heat exchanger area
(heating), 1.3 m² heat exchanger area
(solar), 2.9 kWh/24h stand-by loss,
1¼⬙ solar and heating connections,
1⬙ hot water connection, ¾⬙ circulation
connection
700 x 1631 182
WWSP 540 SOL 361090
up to LI 28 excluding
LIH 26TE
up to LA 28 excluding
LA 26HS
up to SI 30
up to WI 22
500 l nominal volume, 427 l usable
capacity, 4.0 m² heat exchanger area
(heating), 1.6 m² heat exchanger area
(solar), 3.2 kWh/24h stand-by loss,
1¼⬙ solar and heating connections,
1⬙ hot water connection, ¾⬙ circulation
connection
700 x 1961 218
WWSP 432 SOL 361080 4015627361089
WWSP 540 SOL 361090 4015627361096
Solar hot water cylinders
for conventional heating
CWWSP 308 SOL
Solar domestic hot water cylinder made of steel (special enamelling inside) with protection anode, two internal bare-tube heat exchan-
gers for solar and heating, thermometer, polyurethane insulation for minimal stand-by losses, colour white, TK150/DN110 flange.
Permissible operating pressure 13 bar;
Order reference Art.-Nr. Features Diameter x Height
mm
Weight
kg
CWWSP 308 SOL 361120
500 l nominal volume, 290 l usable capacity, 0.8 m² heat exchanger
area (heating), 1.55 m² heat exchanger area (solar), 2.6 kWh/24h
stand-by loss, 1⬙ solar and heating connections, 1⬙ hot water
connection, ¾⬙ circulation connection
600 x 1834 113
CWWSP 411 SOL 361130
400 l nominal volume, 380 l usable capacity, 1.05 m² heat exchanger
area (heating), 1.8 m² heat exchanger area (solar), 2.6 kWh/24h
stand-by loss, 1⬙ solar and heating connections, 1⬙ hot water
connection, ¾⬙ circulation connection
700 x 1631 133
CWWSP 308 SOL 361120 4015627361126
CWWSP 411 SOL 361130 4015627361133
Solar station for hot water
Solar back-up for domestic hot water preparation
SST 25
Heat exchanger solar station consisting of solar separation system and pump assembly with insulation jackets for integrating solar
installations up to 10 m² into the DHW heating system. The solar station enables efficient hot water heating via the heat pump as well as
via the solar installation. Modules with primary and secondary cycle consisting of: 2 circulating pumps (WILO- STAR-ST 25/6 and STAR-RS
24/4); 4 ball valves 1“ with thermometer, return flow inhibitor, safety assembly with safety valve and 0-10 bar pressure gauge, connection
options for expansion vessel (solar controller not included in scope of supply).
Order reference Art.-Nr. Width x Height x Depth
mm
Weight
kg
SST 25 348430
320 x 1050 x 320 19
SST 25 348430 4015627348431
Solar collectors and accessories