Technical data

www.dimplex.de/en
57
2010
General accessories for the heat pump manager
AP PGD
FG 3115
RBG WPM
Order reference Art.-Nr. Short text Features
AP PGD 356570
Remote control for WPM 2006/2007/EconPlus/R
For connection to the wall-mounted WPM 2006
heat pump manager with integrated display or
as an additional remote control for WPM 2007/
EconPlus/R.The remote control has an LC-Display
with identical menu navigation an backlightingl.
The AWPM 900 connecting line must be ordered
separately.
AWPM 900 340210
Connection line for AP PGD
Heat pump manager / remote control connecting
line, 6-core cable. Can also be used as a connecting
line for the removable control panel of the WPM
2007.(Length 15 m)
FG 3115 336620
External temperature sensor with casing
Norm NTC-2 temperature sensor (2.43 kΩ/20 °C)
according to DIN 44574 with weather proof casing
for surface mounting, terminal connection.
RBG WPM 339700
Swimming pool / remote fault indicator relay
module
For connecting the swimming pool circulating
pump (M19) and the output of a 230 V signal if a
system fault occurs (not required for heating and
cooling systems).
AP PGD 356570 4015627356573
AWPM 900 340210 4015627340213
FG 3115 336620 4015627336629
RBG WPM 339700 4015627339705
Special accessories for the heat pump manager WPM 2006
WPM 2006
FA 550
EVL ...
Order reference Art.-Nr. Short text Features
Norm NTC-2 353400
Temperature sensor
For connection to the wall-mounted WPM 2006
heat pump manager with integrated display. Can
be used as a strap-on sensor for mixed heating
circuits, as a flow or cylinder sensor for the bivalent-
renewable operating mode, as a hot water and
room temperature sensor (for installation in on-site
wall casing), standard NTC-2 sensor according to
DIN 44574, diameter of 6 mm, connection cable
6 m.
FA 550 338550
Strap-on sensor
Temperature sensor for the heating circuit or hot
water cylinder with 6 m connection cable, diameter
9.7 mm. Connection to the heat pump manager
(standard NTC sensor according to
DIN 44574).
EVL 996-1 321990
10 m control line
Coded connecting line between the heat pump
manager (heating controller) and an air-to-water
heat pump installed outdoors. Wired ready for use
with non-confusable plug connections (ductwork
at least 70 mm).
EVL 997-1 322000
20m control line
EVL 998-1 322010
30m control line
EVL 999-1 359120
40 m control line
Norm NTC-2 353400 4015627353404
FA 550 338550 4015627338555
EVL 996-1 321990 4015627321991
EVL 997-1 322000 4015627322004
EVL 998-1 322010 4015627322011
EVL 999-1 359120 4015627359123
Special accessories for the heat pump manager WPM 2007
MS PGD
Order reference Art.-Nr. Short text Features
NTC-10 353390
Temperature sensor NTC-10
For connection to the WPM 2007 heat pump
manager with removable control panel. Can be
used as a strap-on sensor for mixed heating circuits,
as a flow or cylinder sensor for the bivalent-renew-
able operating mode, as a hot water and room
temperature sensor (for installation in on-site wall
casing), diameter of 6 mm, connection cable 6 m.
MS PGD 353810
Wall mounting set MS PGD
For using the WPM 2007‘s removable control
panel as a remote control or for installation at an
optimum operating height. Consists of plastic
frames for wall mounting, incl. fixing material, 6 m
connecting cable and brown red plastic covers for
the design screen.
NTC-10 353390 4015627353398
MS PGD 353810 4015627353817
Accessories for heat pump for heating purposes