Technical data

www.dimplex.de/en
6
2010
Max. flow temperature for heating 60 °C
Casing colour white aluminium
High-efficiency air-to-water heat pump
with two performance levels
LA 60TU
Heat pump for heating purposes for outdoor installation, with wall-mounted WPM EconPlus heat pump manager and two compressors
for output reduction when operating at partial load. Sound-optimised through the use of two slow-running EC ventilators, an encap-
sulated compressor housing and a free-swinging compressor baseplate for solid-borne sound insulation. High COPs through high-
performance evaporator, electronic expansion valve and compliance with the requirements of EN 14511 for larger volume flows on the
heat consumption side. Sensor monitoring of the refrigerating circuit for energy-efficient defrosting; integrated thermal energy metering
(display of the thermal energy volume for heating and domestic hot water preparation on the WPM EconPlus heat pump manager).
Access for servicing on the outlet side; observe the minimum clearances for installation close to walls. Can be easily transported with a
lift truck (accessible from underneath) or lifting lugs. Universal design with two compressors for modulating operation, optional DHW
preparation and the possibility of flexible expansion for:
• Bivalent or bivalent-renewable operating mode
• Distribution systems with unmixed and mixed heating circuits
Integrated soft starter, flow and return-flow sensors; external sensor (standard NTC-2) included in the scope of supply.
Electrical connection cable EVL . . UE between heat pump and heat pump manager must be ordered separately.
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 ° C ;
Refrigerant R417A ; Connection heating 2 ⬙ ; Connection voltage 3/N/PE ~400 V, 50 Hz
Order reference Art.-Nr. Heat output with 1 compressor /
COP A2/W35
Heat output with 2 compressors
/ COP A2/W35
Width x Height x
Depth
mm
Weight
kg
LA 60TU 362330
26.4 / 3.8 (3.7) 50.0 / 3.7 (3.6) 1900 x 2300 x 1000 915
Heat output and COP according to EN 255 (EN 14511) at A2/W35 (A2 = air intake temperature +2 °C, W35 = heating water outlet temperature +35 °C).
From an external temperature of 0 °C, a maximum flow temperature of 65 °C is available, which can also be used for DHW preparation.
Note:
Dimplex heat pumps for heating purposes ar
e designed for use in a domestic environment, and conform to the low voltage directive They are thus
also intended for use by non-professionals for heating shops, offices, hotels and other similar working environments, in agricultural establishments
and other residential buildings. The LA 60TU and SI 130TE heat pumps can be supplied, according to the machinery directive, with an external
switch box upon request (order reference: LA 60TU-MD, SI 130TE-MD).
LA 60TU 362330 4015627362338
Electric connecting line heat pump – heat pump manager
Essential accessory for heat pumps with electronic expansion valves
Separate control lines (24V and 230V) between WPM EconPlus / EconR heat pump manager and the high-efficiency air-to-water heat
pump with electronic expansion valve for outdoor installation. Wired ready for use with coded plug connections (non-confusable thanks
to identical connections at both ends of the cable) for installation in a protective tube (minimum tube Ø 70 mm).
Order reference Art.-Nr. for device type Length
m
Weight
kg
EVL 10UE 363520
LA 60TU
10 5.5
EVL 20UE 363530
20 10.0
EVL 30UE 363540
30 15.5
EVL 40UE 363550
40 21.0
Essential accessory for high-efficiency air-to-water heat pumps. Should be installed separately from the mains cable.
Extension of the control line by the owner is not allowed!
EVL 10UE 363520 4015627363526
EVL 20UE 363530 4015627363533
EVL 30UE 363540 4015627363540
EVL 40UE 363550 4015627363557
Weather protection hood for high-efficiency air-to-water heat pumps
WSH 40
Design weather protection cover for retrofitting to high-efficiency air-to-water heat pumps; covers the fan on the air outlet side; deflects
the air outflow downwards and to the side; recommended for installation locations with high wind exposure, for example.
Order reference Art.-Nr. for device type Width x Height x
Depth
mm
Weight
kg
WSH 9 362110
LA 9TU 856 x 724 x 370 13
WSH 12 362120
LA 12TU 1195 x 1063 x 460 17
WSH 25 358970
LA 17TU
LA 25TU
1600 x 1225 x 568 28
WSH 40 358240
LA 40TU
LA 35TUR+
1734 x 1385 x 628 32
WSH 9 362110 4015627362116
WSH 12 362120 4015627362123
WSH 25 358970 4015627358973
WSH 40 358240 4015627358249
Heat pump for heating purposes – air source – outdoor installation