Technical data

www.dimplex.de/en
48
2010
Hot water cylinders and accessories
Hot water cylinder with foil cladding
and temperature sensor
WWSP 332
Steel cylinder (special inside enamelling) with protection anode and 3 supporting feet, polyurethane insulation with minimal stand-by
losses, temperature sensor for connection to the heat pump manager included in the scope of supply, colour white, heating connection
1¼“, hot water connection 1“ external thread, circulation connection “.
Permissible operating pressure 10 bar; Flange TK150/DN110 ;
Order reference Art.-Nr. for device type Features Diameter x Height
mm
Weight
kg
WWSP 332 346610
up to LI 20
excluding LI 16
up to LA 22 excluding
LA 16 / LA 22HS
up to SI 11
up to WI 14
Nominal content 300l, usable capacity 277 l,
heat exchanger area 3,2 m² for a transmission
capacity up to approx. 16 kW, stand-by loss
approx. 2.4 kWh/24h
700 x 1294 130
WWSP 880 337880
up to LI 28
excluding LIH 26TE
up to LA 28
excluding LA 26HS
up to SI 30
up to WI 22
Nominal content 400 l, usable capacity 350 l,
heat exchanger area 4.2 m² for a transmission
capacity up to approx. 20 kW, stand-by loss
approx. 2.8 kWh/24h
700 x 1591 159
WWSP 900 339220
up to LI(H) 28
up to LA 28
up to SI 50
up to WI 50
Nominal content 500 l, usable capacity 430 l,
heat exchanger area 5.7 m² for a transmission
capacity up to approx. 30 kW, stand-by loss
approx. 3.3 kWh/24h
700 x 1920 180
The solar station SST 25 can be used to support DHW preparation for all hot water cylinders.
The reachable hot water temperatures are dependent on the maximum heat output of the heat pump, the heat ex
changer area and the volume
flow in the load circuit (the respective design for a maximum hot water temperature of 45 °C according to the project planning documentation).
For heat pumps with two performance levels, the DHW preparation can be done using a compressor.
WWSP 332 346610 4015627346611
WWSP 880 337880 4015627337886
WWSP 900 339220 4015627339224
Accessories for heat pump for heating purposes
Solar hot water cylinders
for heat pumps
WWSP 432 SOL
Solar domestic hot water cylinder made of steel (special enamelling inside) with protection anode, two internal bare-tube heat exchan-
gers for solar and heating, thermometer, polyurethane insulation for minimal stand-by losses, colour white, TK150/DN110 flange.
Permissible operating pressure 10 bar;
Order reference Art.-Nr. for device type Features Diameter x Height
mm
Weight
kg
WWSP 432 SOL 361080
up to LI 20
excluding LI 16
up to LA 22 excluding
LA 16 / LA 22HS
up to SI 11
up to WI 14
400 l nominal volume, 346 l usable capacity,
3.2 m² heat exchanger area (heating),
1.3 m² heat exchanger area (solar), 2.9 kWh/
24h stand-by loss, 1¼⬙ solar and heating
connections, 1⬙ hot water connection,
¾⬙ circulation connection
700 x 1631 182
WWSP 540 SOL 361090
up to LI 28
excluding LIH 26TE
up to LA 28
excluding LA 26HS
up to SI 30
up to WI 22
500 l nominal volume, 427 l usable capacity,
4.0 m² heat exchanger area (heating),
1.6 m² heat exchanger area (solar), 3.2 kWh/
24h stand-by loss, 1¼⬙ solar and heating
connections, 1⬙ hot water connection,
¾⬙ circulation connection
700 x 1961 218
WWSP 432 SOL 361080 4015627361089
WWSP 540 SOL 361090 4015627361096