Technical data

www.dimplex.de/en
32
2010
Brine-to-water heat pump in universal design
Max. flow temperature for heating 58 °C
Casing colour white
Low-temperature brine-to-water heat pump
Universal design
SI 5TE
Heat pump for indoor installation with integrated regulation WPM 2007 plus. The control panel is integrated into a brown-red design
screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Variable connection
options for brine and heating connections on the rear wall of the casing. Sound-optimised through insulated metal casing and double
vibration-isolated compressor. Economiser for high coefficients of performance. Universal design with optional DHW preparation and
the option of flexible expansion for:
• Bivalent or bivalent-renewable operating mode
• Distribution systems with unmixed and mixed heating circuits
Soft starter, load contactor for brine circulating pump, integrated flow and return flow sensor; external sensor (standard NTC-2) and dirt
filter for brine circuit included in the scope of supply.
Brine package and brine circuit manifold must be ordered separately.
Lower operating limit heat source (heating operation) -5 °C ; Upper operating limit heat source (heating operation) 25 ° C ;
Refrigerant R407C ; Connection heating 1¼ ⬙ ; Heat source connection 1¼ ⬙.
Order reference Art.-Nr. Heat output with 1 compressor /
COP B0/W35
Connection voltage Width x Height x
Depth
mm
Weight
kg
SI 5TE 352850
5.3 / 4.3 (4.1)
3/N/PE ~400 V, 50 Hz 650 x 805 x 462
109
SI 7TE 352860
6.9 / 4.3 (4.1) 111
SI 9TE 352870
9.2 / 4.4 (4.2) 118
SI 11TE 352880
11.8 / 4.4 (4.2) 122
SI 14TE 352890
14.5 / 4.5 (4.3) 130
SI 17TE 352900
17.1 / 4.6 (4.4) 133
Heat output and COP according to EN255 (EN 14511) at B0/W35 (B0 = brine inlet temperature 0 °C, W35 = heating water outlet temperature +35 °C) .
SI 5TE 352850 4015627352858
SI 7TE 352860 4015627352865
SI 9TE 352870 4015627352872
SI 11TE 352880 4015627352889
SI 14TE 352890 4015627352896
SI 17TE 352900 4015627352902
Max. flow temperature for heating 58 °C
Casing colour white
Low-temperature brine-to-water heat pump
Universal design
SI 5ME
Heat pump for indoor installation with integrated regulation WPM 2007 plus. The control panel is integrated into a brown-red design
screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Variable connection
options for brine and heating connections on the rear wall of the casing. Sound-optimised through insulated metal casing and double
vibration-isolated compressor. Economiser for high coefficients of performance. Universal design with optional DHW preparation and
the option of flexible expansion for:
• Bivalent or bivalent-renewable operating mode
• Distribution systems with unmixed and mixed heating circuits
Soft starter (from 9 kW), integrated flow and return sensor; external sensor (standard NTC-2), dirt filter for brine circuit included in the
scope of supply.
Brine package and brine circuit manifold must be ordered separately.
Lower operating limit heat source (heating operation) -5 °C ; Upper operating limit heat source (heating operation) 25 °C ; Refrigerant
R407C ; Connection heating 1¼ ⬙ ; Heat source connection 1¼ ⬙.
Order reference Art.-Nr. Heat output with 1 compressor /
COP B0/W35
Connection voltage Width x Height x
Depth
mm
Weight
kg
SI 5ME 353010
5.0 / 4.0 (3.8)
1/N/PE ~230 V, 50 Hz 650 x 805 x 462
109
SI 7ME 353020
6.4 / 3.9 (3.7) 111
SI 9ME 353030
9.3 / 4.0 (3.8) 118
SI 11ME 353040
11.0 / 4.0 (3.9) 122
SI 14ME 353050
15.0 / 4.1 (3.9) 130
Heat output and COP according to EN255 (EN 14511) at B0/W35 (B0 = brine inlet temperature 0 °C, W35 = heating water outlet temperature +35 °C) .
SI 5ME 353010 4015627353015
SI 7ME 353020 4015627353022
SI 9ME 353030 4015627353039
SI 11ME 353040 4015627353046
SI 14ME 353050 4015627353053
Heat pump for heating purposes – ground source