Technical data

www.dimplex.de/en
29
2010
Domestic hot water preparation for compact brine-to-water heat pump
Supplementary package for DHW preparation
Hot water cylinder
HPK(H) ... WWSP 442E
The 400 l hot water cylinder is heated by the heat pump for heating purposes and offers convenient hot water preparation, also during
longer shut-off times. It matches the height and design of the compact brine-to-water heat pump with built-under buffer tank.
Order reference Art.-Nr. Short text Features Width x Height x
Depth
mm
Weight
kg
WWSP TE 353460
Supplementary
package for
DHW preparation
Domestic hot water preparation with short
reheating times and adjustable time programs;
sales package consisting of WWSP 442 E hot
water cylinder with UP 80 circulating pump for
domestic hot water preparation and WSW KS
hot water connection kit.
650 x 1660 x 680 190
The descriptions of the individual components can be found on the next pages!
WWSP TE 353460 4015627353466
Hot-water temp. up to max. 60 °C
Lower operating limit heat source (heating operation) 8 °C
Upper operating limit heat source (heating operation) 35 °C
Supplementary package for DHW preparation
AWP 30HLW
The hot water heat pump functions independently of the heat pump for heating purposes by using waste heat from the installation
location and produces DHW temperatures up to max. 60 °C in heat-pump-only operation.
Order reference Art.-Nr. Short text Features Width x Height x
Depth
mm
Weight
kg
AWP 30HLW 351390
Hot water heat
pump with sheet
steel casing, air
duct connection
and additional heat
exchanger
Hot water preparation using active heat
extraction from indoor air. Recommended
temperature of the room in which the system
is installed is approx. 15 °C.
660 x 1700 x 700 175
The descriptions of the individual components can be found on the next pages! The compact domestic ventilation unit (exhaust air, LWP 300W)
is available in the same design with integrated DHW preparation!
AWP 30HLW 351390 4015627351394
Built-under hot water cylinder and connection set
WWSP 229E
Built-under hot water cylinder
Nominal capacity 227 l, in brine-to-water heat pump design to enable space-saving installation on the built-under buffer, tube heat
exchanger (internal), steel cylinder (special inside enamelling) with protection anode, polyurethane insulation with minimum stand-by
losses; integrated temperature sensor for connection to the heat pump manager, colour: white, brown red design screen heat exchanger
area 2.9 m² smooth pipe (internal), heating connection 1¼“ external thread, hot water connection 1“ external thread, circulation connec-
tion ¾“ internal thread.
Connection set
Hose set for easy connection of the compact brine-to-water heat pump and the built-under hot water cylinder to the heating systems.
Consisting of 2 corrugated stainless steel pipes with high-and-low temperature insulation, 2 elbow unions with manual air bleeds and an
installation option for the hot water circulating pump (pump not included in the scope of supply).
Order reference Art.-Nr. Short text for device type Width x Height x
Depth
mm
Weight
kg
WWSP 229E 353380
Built-under hot water cylinder up to SI(KH) 9 650 x 1040 x 680 110
VSW 229 356050
Connection set, hot water SIK(H) with WWSP 229E
Can be used in service areas with short shut-off times or reduced hot water consumption.
Note: A minimum buffer volume of the heating system of 10% of the heating water flow must be ensured either by a buffer tank or other suitable
measures!
WWSP 229E 353380 4015627353381
VSW 229 356050 4015627356054
Heat pump for heating purposes – ground source