Technical data

www.dimplex.de/en
17
2010
Air-to-water heat pump with simplified regulation
Max. flow temperature for heating 58 °C
Casing colour white aluminium
Air-to-water heat pump with simplified controller
Compact design
LAK 10M
Air-to-water heat pumps for close-to-wall outside installation and integrated heat pump control. The remote control included in the
scope of supply enables the manual setting of the desired return temperature or the external switching via a higher-level regulation
system. Energy-efficient defrosting by reverse circulation. Essential components of the heating circuit are already integrated into the
device:
• Built-in pipe heater (2 / 4 / 6 kW),
• Expansion vessel (8 l)
• Saf ety module
• Return flow and external temperature sensors
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 ° C ;
Refrigerant R404A ; Connection heating 1 ⬙ ; Connection voltage 1/N/PE ~230 V, 50 Hz
Order reference Art.-Nr. Heat output with 1 compressor /
COP A2/W35
Connection voltage Width x Height x
Depth
mm
Weight
kg
LAK 10M 354540
8.1 / 3.4 (3.2) 1/N/PE ~230 V, 50 Hz 1285 x 880 x 695 185
Heat output and COP according to EN 255 (EN 14511) at A2/W35 (A2 = air intake temperature +2 °C, W35 = heating water outlet temperature +35 °C)
LAK 10M 354540 4015627354548
Heat pump for heating purposes – air source – outdoor installation
Reversible air-to-water heat pump with simplified controller
Max. flow temperature for heating 58 °C
Flow temperature cooling min. 7 °C
Casing colour white aluminium
Reversible air-to-water heat pump
Compact design optimised for heating
LAK 10MR
Air-to-water heat pump for outdoor installation with reversible refrigerating circuit for heating and cooling and simplified regulation.
The remote control included in the scope of supply enables the manual setting of the desired room temperature or the external
switching via a higher-level regulation system. Essential components of the heating circuit are already integrated into the device:
• Built-in pipe heater (2 / 4 / 6 kW),
• Heat circulating pump (note the free compression)
• Expansion vessel (8 l)
• Saf ety module
• Return flow and external temperature sensors
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 °C ;
Lower operating limit heat source (cooling operation) 17 °C ; Upper operating limit heat source (cooling operation) 40 °C ;
Refrigerant R407C ; Connection heating 1 ⬙ ; Connection voltage 1/N/PE ~230 V, 50 Hz
Order reference Art.-Nr. Heat output with 1
compressor / COP
A7/W35
Cooling capacity 1
compressor / EER
A35/W7
Connection voltage Width x Height x
Depth
mm
Weight
kg
LAK 10MR 354510
9.3 / 3.8 7.8 / 2.2 1/N/PE ~230 V, 50 Hz 1270 x 860 x 670 170
Heat output and COP according to EN 14511 at A7/W35 (A7 = air intake temperature +7 °C, W35 = heating water outlet temperature +35 °C).
Cooling capacity and COP at A35/W7 (A35 = air intake temperature +35°C, W7 = cooling water outlet temperature +7°C)
LAK 10MR 354510 4015627354517
Max. flow temperature for heating 60 °C
Flow temperature cooling min. 7 °C
Casing colour white aluminium
Reversible air-to-water heat pump
Optimised for cooling at higher outside temp.
LAC 16TR
Air-to-water heat pump for outdoor installation with reversible refrigerating circuit for heating and cooling and simplified regulation.
The remote control included in the scope of supply enables the manual setting of the desired return temperature or the external
switching via a higher-level regulation system. Energy-efficient defrosting by reverse circulation. Essential components of the heating
circuit are already integrated into the device:
• Built-in pipe heater (2 / 4 / 6 kW),
• Heat circulating pump (note the free compression)
• Expansion vessel (8 l)
• Saf ety module
• Return flow and external temperature sensors
Lower operating limit heat source (heating operation) -20 °C ; Upper operating limit heat source (heating operation) 35 °C ;
Lower operating limit heat source (cooling operation) 15 °C ; Upper operating limit heat source (cooling operation) 45 °C ;
Refrigerant R417A ; Connection heating 1 ⬙ ; Connection voltage 3/N/PE ~400 V, 50 Hz
Order reference Art.-Nr. Heat output with
1 compressor /
COP A7/W35
Cooling capacity
1 compressor /
EER A35/W7
Connection voltage Width x Height x
Depth
mm
Weight
kg
LAC 16TR 355240
13.3 / 3.7 14.0 / 2.8 3/N/PE ~400 V, 50 Hz 1270 x 860 x 670 196
Heat output and COP according to EN 14511 at A7/W35 (A7 = air intake temperature +7 °C, W35 = heating water outlet temperature +35 °C).
Cooling capacity and COP at A35/W7 (A35 = air intake temperature +35°C, W7 = cooling water outlet temperature +7°C)
LAC 16TR 355240 4015627355248