Technical data

www.dimplex.de/en
14
2010
Special accessories for air-to-water heat pump installed outdoors
Electric connecting line heat pump – heat pump manager
EVL ...
Control line between the heat pump manager and the air-to-water heat pump for outdoor installation. Wired ready for use and with
coded plug connections at both ends for installation in a protective tube (min. diameter 70 mm, non-confusable: Round plug for con-
nection to the heat pump).
Order reference Art.-Nr. for device type Length
m
Weight
kg
EVL 996-1 321990
LA ..AS
LA ..PS
LA ..MS
10 2.9
EVL 997-1 322000
20 4.6
EVL 998-1 322010
30 8.7
EVL 999-1 359120
40 12.8
Should be installed separately from the mains cable.
Extension of the control line by the owner is not allowed!
EVL 996-1 321990 4015627321991
EVL 997-1 322000 4015627322004
EVL 998-1 322010 4015627322011
EVL 999-1 359120 4015627359123
Electric connecting line heat pump – heat pump manager
EVL 10...30R
Control line between the heat pump manager WPM 2006 R and a reversible air-to-water heat pump for outdoor installation. Wired ready
for use und with coded plug connections on both ends (non-confusable) for installation in a protection tube (diameter min. 70 mm).
Order reference Art.-Nr. for device type Length
m
Weight
kg
EVL 10R 342510
LA...R
1 0 5
EVL 20R 342520
2 0 9
EVL 30R 342530
30 14
EVL 40R 363720
40 18
Should be installed separately from the mains cable.
Extension of the control line by the owner is not allowed!
EVL 10R 342510 4015627342514
EVL 20R 342520 4015627342521
EVL 30R 342530 4015627342538
EVL 40R 363720 4015627363724
Heating water connection line, heat pump – heating system
Optimised for connection to a heat pump
HVL ..
Isolated 2-pipe system (suitable for ground-laying) with ready-to-use 90° bend for connection to a heat pump installed outdoors.
Suitable for heat pumps for heating and cooling; max. operating temperature 95 °C; max. operating pressure 6 bar (at 65 °C – 9 bar);
loading capacity SWL 60 (33 kN/m)
2
). Consisting of PE-Xa medium pipes with EVOH barrier layer to prevent oxygen diffusion, closed-cell
crosslinked PE foam and a highly-flexible corrugated PE-HD cover pipe; includes a ready-to-use 90° connection pipe (length 1.2 m) for
quick and easy connection to the heat pump, including two PE end caps, hazard-warning tape „Caution district heating“ and four screw
fittings (2 x 1¼“ internal thread, 2 x 1¼“ external thread).
Order reference Art.-Nr. Connection heating
⬙
Features Weight
kg
HVL 25-50 358650
1 ¼
Length 5 m + 1.2 m connection pipe,
2 x 32/2.9 Ø cover pipe, 145 mm
29
HVL 25-75 358660
Length 7.5 m + 1.2 m connection pipe,
2 x 32/2.9 Ø cover pipe, 145 mm
33
HVL 25-100 358670
Length 10 m + 1.2 m connection pipe,
2 x 32/2.9 Ø cover pipe, 145 mm
38
HVL 25-150 358880
Length 15 m + 1.2 m connection pipe,
2 x 32/2.9 Ø cover pipe, 145 mm
42
HVL 32-150 358680
Length 15 m + 1.2 m connection pipe,
2 x 40/3.7 Ø cover pipe, 175 mm
61
HVL 32-200 358690
Length 20 m + 1.2 m connection pipe,
2 x 40/3.7 Ø cover pipe, 175 mm
74
HVL 32-250 358700
Length 25 m + 1.2 m connection pipe,
2 x 40/3.7 Ø cover pipe, 175 mm
88
Additional, transitional screw connections (1½“ thread-sealing to 1 ½“ flat-sealing) are required for high-efficiency heat pumps.
The pressure drops required for pump dimensioning can be found in the installation instructions.
HVL 25-50 358650 4015627358652
HVL 25-75 358660 4015627358669
HVL 25-100 358670 4015627358676
HVL 25-150 358880 4015627358881
HVL 32-150 358680 4015627358683
HVL 32-200 358690 4015627358690
HVL 32-250 358700 4015627358706
Heat pump for heating purposes – air source – outdoor installation