Use and Care Manual

1-888-346-7539 | www.dimplex.com

In keeping with our policy of continuous product improvement,

we reserve the right to make changes without notice.

Heater

Heater is not turning on

Set temperature is below room tem-

perature

See operation instructions

Heat is disabled; --- is displayed when

heat button is pressed

See operation instructions

Defective heater assembly Replace heater assembly

Defective main control board Replace main control board

Heater cuts out after a short time

Inadequate air circulation

Ensure that there is su󰀩cient space

around the rebox. Install feet if nec-

essary.

Buildup of dust/debris

Ensure that the exterior intake louvers

and rebox cavity are free of dust/

debris

Defective heater assembly Replace heater assembly

Noise

Excessive noise when the heater is on

Buildup of dust/debris in the heater

assembly

Ensure that the exterior intake louvers

and rebox cavity are free of dust/

debris

Defective heater assembly Replace heater assembly

Excessive noise when ames are on

Flicker rod is hitting or rubbing against

internal component

Ensure that the icker rod is straight

and mounted properly in the bracket;

and spinning freely away from other

components. Replace the icker rod if

necessary.

Defective icker motor Replace icker motor

REV PCN DATE

01 - 29-AUG-19