FutM2CE & FutM3CE As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use. 08/54927/0 Issue 3 These products comply with all the required European and UK Product Safety, Electromagnetic Compatibility and Environmental Standards. They are fully compliant with the LVD, EMC, RoHS and Eco Design Directives and Regulations.
Important Safety Advice IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY BEFORE USE AND RETAINED FOR FUTURE REFERENCE WARNING: To avoid danger of suffocation please remove all packaging materials particularly plastic and EPS and keep these away from vulnerable people, children and babies. WARNING: To avoid the risk of accidental strangulation from the supply cord all children and vulnerable people must be supervised when in the vicinity of the product whether it is working or not.
DO NOT operate the radiator with the mains lead overhanging the outlet grille. If the radiator is tipped over, unplug it and allow it to cool before standing it back up. DO NOT pull, carry or move the appliance using the power cable. The supply cord should be uncoiled before use. This instruction leaflet belongs to the appliance and must be kept in a safe place. If changing owners, the leaflet must be surrendered to the new owner.
Assembly WARNING - The radiator must only be operated with the wheels and castors securely fitted and in the upright position. WARNING - The radiator is heavy – ensure that it is supported to prevent it from toppling. Ask a second person to help with this if necessary. • Open the packaging and remove the product. • Turn the radiator upside down on a carpet or other soft surface to avoid damage. • Fit the castors in position and secure using the wing bolts.
Operation Before using the heater ensure that all warnings and instructions have been read carefully. IMPORTANT - Objects or clothing must not be placed on the appliance. IMPORTANT - Do not operate unless the castors have been securely fitted. IMPORTANT - The element has been coated with a protective film which will burn off during the first few minutes of use and may cause a small amount of fuming. This is quite normal, the fumes are non-toxic and will quickly disappear.
Standby & Power Up When the appliance is plugged in there will be an audible beep and the unit will enter 'Standby' mode. Standby mode is an inactive mode where the appliance is energised but will not emit any heat. The Standby mode is identified by a blank display with only the Standby icon illuminated red, as shown below. Press the Standby button to turn the product On First Time Start Up? YES NO On first time start-up the product will start with the default settings.
Operational Modes The appliance has the following operational modes: • Manual mode, this is a continuous active heating mode. It is possible to select a heat output and a desired room temperature, the appliance will continue to control the room until the mode is changed, the appliance is plugged out. • Runback Timer mode, this is a time limited heating mode. The appliance will operate with the heat selection and temperature for the duration selected.
Manual Mode Setup Manual mode is the default operational mode. To activate manual mode: • From the Standby screen press the standby button ' '. the appliance will automatically enter manual mode with the default or last used settings. • To alter the temperature use the ‘ ’ & ‘ ’ keys as required, the heat mode settings can also be adjusted using the ' ' key. Frost protection mode Within the manual mode the appliance has a frost protection function.
Delayed Start Timer Setup To setup a delayed start timer: • First set the Heat mode and Temperature you wish the appliance to operate after the delayed start period. • Press and hold the Runback button ‘ ’ for 2 seconds. The delayed start icon ‘ ’ will begin to flash on the screen and the default delayed start duration of 1Hr (1 hour) will also appear. • The Delayed Start duration can be increased using the Runback button ' ' or alternatively using the ‘ ’ and ‘ ’ buttons.
Temperature Units To switch temperature from degrees Celsius to degrees Fahrenheit: • Press and hold ' ' and ' ' buttons together for 2 seconds. • The temperature units on the display will change to degrees Fahrenheit. • To revert to degrees Celsius, repeat the button press outlined above. Press & hold Safety Features & Additional Information This appliance incorporates a number of safety devices.
Model Identifier(s): FutM2CE FutM3CE Heat output Nominal heat output Pnom 2.0 3.0 kW Minimum heat output (indicative) Pmin 1.0 1.5 kW Maximum continuous heat output Pmax,c 2.0 3.0 kW At nominal heat output elmax 0.0 0.0 kW At minimum heat output elmin 0.0 0.0 kW In standby mode elSB 0.0005 0.0005 kW Auxiliary electricity Consumption Type of heat output/ room temperature control With electronic room temperature control Contact details Yes UK: Glen Dimplex UK Ltd.
•Caused by any misuse, abuse or negligent use of the Dimplex product, including but not limited to any failure to use it in accordance with the Operating Instructions supplied with the product. •Caused by any failure to assemble, install clean and maintain your Dimplex product in accordance with the Operating Instructions supplied with the product unless this was carried out by Dimplex or its authorised dealers.
