Owner`s manual

8
Operation
turn the thermostat control
clockwise all the way to turn
on the heater. When the room
reaches the desired temperature,
turn the thermostat knob counter
clockwise until you hear a click.
Leave in this position to maintain
the room temperature at this
setting. For additional heat, turn
clockwise until you hear the click
again and the heater will turn on.
!
NOTE: When the heater
is switched on, the heater
fan will operate. The heater
element may or may not be on
depending on the thermostat
control setting (see “Heater
Thermostat Control”).
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
Main On/Off Switch to Off (“O”)
and waiting ve (5) minutes
before switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
Customer Service at
1-888-346-7539.
Remote Operation
The Compact Stove is supplied
with an integrated On/Off remote
control.
!
NOTE: Ensure that the
stove's Main On/Off Switch
is set to the remote Control
setting (“ ” position).
To operate, push the ON button
to turn stove on, push the OFF
button to turn the stove off.
Remote Initialization/
Reprogramming
In the event that your remote
control ceases to operate your
replace, follow these steps to re-
initialize the hand-held transmitter
and the remote control receiver in
the replace:
Place the 1. Main ON/OFF
Switch (Figure 1A) in the
OFF (“O”) position.
Wait a minimum of ve (5) 2.
seconds and then place the
Main ON/OFF Switch in the
Remote Control (“ ”) position.
Within3. 10 seconds of
changing the switch position,
press the ON button located
on the remote control
transmitter (Figure 2).