Owner`s manual

8
Figure 2
Bulb
Screws
(5)
Access Panel
Operation
supplies power to the heater fan
and the heater element, when the
switch is in the ON position the
heater operates on High.
!
NOTE: The Low Heat On/
Off Switch must also be in the
On position for the high heat
setting to operate.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
Main On/Off Switch to Off and
waiting ve (5) minutes before
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
Customer Service at
1-888-346-7539.
Maintenance
 WARNING: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of re, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least ve (5) minutes for
the light bulb to cool off before
touching, to avoid accidental
burning of the skin. The light bulb
needs to be replaced when you