Instructions / Assembly

11
Fireplace Installation
Interchangable Media
• SolidMedia: Comes installed
in the rebox.
• LooseMedia:
1. Remove rebox from the
wall.
2. Carefully lay the unit down
on a solid at surface with
the front of the unit facing
down. (Figure 7)
!
NOTE: It is recommended
that a protective barrier be used
underneath the unit to ensure
that the front of the frame does
not get scratched.
3. Remove the 4 screws on
each side, that secure the
trim to the rebox.
4. Lift the rebox, directly up,
off of the trim.
!
NOTE: The media is loosly
resting in the media tray and
will easily come out once the
trim has been removed.
5. Reattach the trim to the
rebox.
6. Reattach the rebox to the
wall and carefully pour and
evenly distribute the loose
media in the Media tray of
the rebox.
Figure 7
Figure 8