Owner`s manual

to turn the stove off.
Remote Control
Initialization
1. Place the Main ON/OFF
Switch (Figure 2A) in
the OFF (“ o ”) position.
2. Waitaminimumofve
(5) seconds and then
place the Main ON/OFF
Switch in the Remote
(right) position.
3. Within 10 seconds of
changing the switch position, press the ON button located on the
remote control transmitter (Figure 3). This will synchronize the
remote control transmitter and the stove receiver.
!
NOTE: You will have only 10 seconds to perform this last step.
Failure to do so will result in these steps needing to be followed
again.
Battery Replacement
To replace the battery:
• Slidebatterycoveropenonthehandheldtransmitter.
• Correctlyinstallone(1)12Volt(A23)batteryinthebatteryholder.
• Closethebatterycover.
Maintenance
WARNING: Disconnect power before attempting any maintenance
orcleaningtoreducetheriskofre,electricshockordamageto
persons.
Light Bulb Replacement
Allow at least 10 minutes for light bulbs and heater to cool off before
touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of
6
ON
Button
Battery
Cover
OFF
Button
Battery
Figure 3