Installation Sheet

10 www.dimplex.com
4. Install the mounting bracket on the wall using the 3 provided screws. For concrete wall installations, use the
provided screws in conjunction with the provided concrete anchors (Figure 4). For installations on other wall
materials such as drywall (without studs) or brick ensure suitable mounting hardware is used.
5. Position the heater on the bracket at the desired angle. The heater can be wall-mounted at a 35° or 45° angle
directed toward the ground (Figure 5). Ensure the ange on the unit is fully inserted into the slot on the bracket
(Figure 6).
Figure 5
Figure4
Figure 6
Installation
Figure 7
6. Secure the heater to the bracket on one side using the bracket hardware (bolt and wing nut) (Figure 7).
!
NOTE: The bracket hardware can be installed on either side of the bracket.