User Manual
Table Of Contents
- 1 IMPORTANT SAFEGUARDS
- 2 Connecting the Controller
- 3 Securing Your Electric Blanket
- 4 Using The Controller
- 5 Overheat / Element Protection
- 6 Recommended Cleaning Instructions
- 7 Servicing Your Blanket and Controller/s
- 8 Storage
- 9 Troubleshooting
- 10 Warranty
- a) in the case of the Dimplex products used for personal, domestic or household purposes, a period of 24 months from the date the Dimplex product is purchased as a brand new product from a retailer located in Australia or New Zealand; and
- b) in the case of the Dimplex product used for purposes other than personal, domestic or household purposes (including business or commercial use), a period of 12 months from the date the Dimplex product is purchased as a brand new product from a reta...
- b) the Dimplex product requires repairs due to damage resulting from accident, misuse, incorrect installation, improper liquid spillage, cleaning or maintenance, unauthorised modification, use on an incorrect voltage, power surges and dips, voltage su...
- c) the repair relates to the replacement of consumable parts such as fuses in plugs and bulbs or any other parts of the Dimplex product which require routine replacement;
- d) you are unable to provide us with reasonable proof of purchase for the Dimplex product;
- e) the breakdown occurs after the expiry of the express warranty period set out in section 1; or
- f) the Dimplex product was not purchased in Australia or New Zealand as a brand new product.
- Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled...
- If you acquired the goods in New Zealand, similar provisions of the Consumer Guarantees Act 1993 may apply, but may be excluded if you acquired the goods for the purpose of a business.
- You may make a claim under this warranty by visiting our website at (www.dimplex.com.au in Australia, www.dimplex.co.nz in New Zealand), contacting our customer care line (1300 556 816 in Australia, 09 274 8265 in New Zealand) or visiting a Dimplex se...
- To make a valid claim under this warranty, you must:
- a) lodge the claim with us as soon as possible and no later than 14 days after you first become aware of the breakdown;
- b) provide us with the Dimplex product serial number;
- c) provide us with reasonable proof of purchase for the Dimplex product; and
- d) if required by us, provide us (or any person nominated by us) with access to the premises at which the Dimplex product is located at times nominated by us (so that we can inspect the Dimplex product).
- If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the Dimplex product or replace the Dimplex product with a product of identical specification (or where the pro...
- Where you make a claim under this warranty, a Dimplex authorised repairer may need to attend your premises to inspect the Dimplex product. If the Dimplex product is located in Australia, we may charge you a service call fee if a repairer will be requi...
4 Using The Controller
• Use your Electric Blanket with Detachable Controller Model MC-102A Only.
• Do not use any other controller for this blanket.
0 = Off
1 = Low Heat (Suitable for all night use)
2 = Medium Heat
3 = High Heat (For preheating the bed only)
0 = Off
• To select the required heat setting, slide the
“Temperature Select Slide Knob” up or down to your
desired setting.
• The selected position will be indicated by lighting up the
corresponding Red Light.
i.e. If Heat setting “1” is selected, 1 Light will illuminate.
If Heat setting “2” is selected, 2 Lights will illuminate.
If Heat setting “3” is selected, 3 Lights will illuminate.
If Heat setting “O” (Off) is selected (at either end of the slide) no lights will
illuminate.
TURN OFF AND UNPLUG THE BLANKET WHEN NOT IN USE.
Keep the controller away from external heat sources. i.e. a heater, fire place etc.
4.1 Electrical Field Effect
When using the Blanket, some people may be susceptible to a tingling sensation
when alone or when touching someone else using the Blanket.
This “Tingling” feeling is known as an “electric field effect” and is occasionally known
to happen across all makes and brands of Blankets. It is caused by the current
flowing through the element creating an Electromagnetic Field (EMF). Some people
are more susceptible to feeling this EMF tingling sensation than others. This is no
cause for concern and is in no way an electric shock.
Heat
Level
Temperature
Select Slide
Knob
Page 7 of 16
Rev 2