Operating Guide

Dimplex Fireplace DF28L-PRO / DF28DWC-PRO / DF26L-PRO / DF26DWC-PRO 7
Installation
Placement
1. The Dimplex Electric Fireplace does
not require any special venting.
Make sure there is clearance for air
circulation beneath the unit and at
least ¹/" (12 mm) behind it.
CAUTION
directly on carpet or similar surfaces

2. Install the unit in an opening with the
following dimensions:
Model DF28
A 27" (686 mm) wide
B 23 ¹/" (587 mm) high
C 8" (203 mm) deep
Model DF26
A 24 ³/" (619 mm) wide
B 18 ¹/" (470 mm) high
C 8" (203 mm) deep
A
B
C
3. If installing the unit in an existing
fireplace opening, seal all drafts and
vents with a non-fibrous insulation
material to prevent any chimney
debris from falling onto the unit. Do
not install into an existing fireplace
opening that is prone to dampness.