Operation Manual

9
Operation
Figure 3
AC B

down the front cover panel
located on the lower front of the

A. 3-Position Switch
The switch has two On positions
marked with
and “ManualThe
“Manual“ position is for manual

built-in remote control is by-

The
position is for operating
the unit with the provided remote

When in

operated with the On and Off

When the switch is in the center

B.
Heater On/Off Switch

supplies power to the heater

When the switch is in the On
position the heater operates if the

C.
Heater Thermostat Control
To adjust the temperature to

turn the thermostat control
clockwise all the way to turn


turn the thermostat knob counter

Leave in this position to maintain
the room temperature at this

clockwise until you hear the click

Resetting the Temperature
Cutoff Switch

automatic cut out will turn the
heater off and it will not come

It can be reset by switching
the 3-Position Switch to Off
and waiting 5 minutes before
