Operation Manual
12
Maintenance
Unscrew the bulb(s) counter
Install the light access cover
Glass Cleaning
The glass is cleaned in the
factory during the assembly
front glass panel may collect
dust particles; these can be
removed by dusting lightly with
can be cleaned with a damp
should be completely dried with
a lint free cloth to prevent water
do not use abrasive cleaners or
spray liquids on the clear door
Compact Fireplace
Surface Cleaning
Use warm water only to clean
painted surfaces of the Compact
Servicing
authorized service representative
should perform any other
Figure 5
Screws
Light Access
Cover