Operation Manual

11


Check with your Local
Authority or Retailer for recycling

Operation
WARNING: Disconnect
power before attempting any
maintenance or cleaning to


Light Bulb Replacement
Allow at least 5 minutes for light
bulbs and heater to cool off before
touching bulbs to avoid accidental

Light bulbs need to be replaced
when you notice a dark section

and detail of the log exterior

under the log set which generate

Helpful Hints: It is a good idea to
replace all light bulbs at one time
if they are close to the end of their

reduce the number of times you
need to open the unit to replace

Light Bulb Requirements
Quantity of 2 clear chandelier
or candelabra bulbs with a J-12
-

60 CTC
Replacement:
Unplug the unit from power 

On the back of the Compact 

from the light access cover

Remove the light access 


locate and examine the bulbs
to determine which bulb(s)


Correctly install one (1) 12 



Maintenance