Operation Manual

10  
Operation
CAUTION: If you need to

unplug the unit and call technical

!
NOTE: The heater may emit


condition caused by initial heating
of internal heater parts and will

Remote Control 

integrated On/Off 
!
NOTE: Ensure that the
replace 3-Position switch
is set to the remote control
setting (up position).



Remote Control Initialization/
Reprogramming
In the event that your remote
control ceases to operate your

re-initialize the remote control and

Place the  3-Position Switch
O”)


ON





Figure 4
seconds and then place
the 3-Position Switch in the
Remote Control (“II
Within3. 10 seconds of

press the On button located


This will synchronize the remote

!
NOTE: You will have only 10


steps needing to be followed

Battery Replacement
To replace the battery:
Slide battery cover open on 