Installation Guide

7
other applicable regulations to
reduce the risk of re, electric
shock and injury to persons.
Do not attempt to wire your
own new outlets or circuits. To
reduce the risk of re, electric
shock or injury to persons,
always use a licensed
electrician.
Installation
① Remove all packaging from
unit and ensure heater exhaust
is free from debris and packaging
remnants.
② Place unit on oor in desired
location.
WARNING: Keep combustible
materials, such as furniture,
pillows, bedding, papers,
clothes, and curtains at least
3 feet (0.9 m) from the front
of the heater and keep them
away from the sides and rear.
③ Make sure the unit's Main On/
Off switch is switched Off (refer to
operating instruction section).
④ Plug the unit into a 15 Amp,
120 VAC outlet directly. The
Stove Installation
heater is not intended for use with
an extension cord.