INSTRUCTION MANUAL Portable Air Conditioner Model: DCP16C For domestic household use only.
IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully before using your Portable Air Conditioner for the first time and keep them in a safe place. WARNING – This appliance must not be used in a bathroom.
• • • • • • • • • • • may lead to a risk of fire or electric shock. Only operate this appliance with a minimum of 50cm clearance all around i.e. away from walls, furniture and overhanging objects such as curtains or a shelf. WARNING: To avoid danger of suffocation please remove all packaging materials particularly plastic and EPS and keep these away from vulnerable people, children and babies. NEVER drop or insert any object or fingers into any openings.
Exposed to the weather outdoors 4 Near water If the power cable wires are frayed or cut Where small children may be left unattended If an extension lead may become overloaded Where the power cable may be damaged On a slope or uneven surface Where there is risk of fire or close to a naked flame Where it may be damaged by chemicals Where there is a risk of interference by foreign objects This product is not made for DIY repair If there is a risk of water falling on the unit
Specification Model no. Colour Power supply DCP16C White/Black 220-240V~, 50Hz Operating temperature 5-43°C Thermostat range 17-30°C Rated Input Power 1.8kW Cooling Capacity 4.
Parts (1) (2) (3) (4) (5) 6 Control panel Display screen Air outlet & adjustable louvres Window kit adaptor Exhaust hose (6) (7) (8) (9) (10) Cool air inlet Cool air filter Hot air inlet Hot air filter Drain plug (please fit before use) 1 x Exhaust hose 1 x Window slider kit (with hole) 1 x Remote control 1 x Window slider kit (without hole)
Control Panel (9) (1) (2) (3) (4) (5) Power button Function button Temp increase (+) button Temp decrease (-) button LED display screen (6) (7) (8) (9) Speed button Timer button Sleep button Turbo button Indicator Lights In order - counter clockwise: • Cool mode • Tank full • Dry (dehum) mode • Sleep mode • Auto mode • Low fan speed • Med fan speed • High fan speed LED Display • The LED display indicates the current set temperature or the timer setting.
Installation PREPARATION NOTE: All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different. The unit can be controlled by the control panel or with the remote control. EXHAUST HOSE INSTALLATION The exhaust hose and adaptor must be installed or removed in accordance with the set function (FUNC). For COOL & DRY functions, the exhaust hose must be installed. For FAN only - the exhaust hose should be removed.
Installation EXHAUST HOSE INSTALLATION 1. To remove the exhaust hose, press slightly & pull away from the unit. The following diagrams indicate the removal of the exhaust hose. 2. If the exhaust hose is loose, twist the tube clockwise to tighten at the base. NOTE: This unit has a self evaporative system which removes excess condensation by means of evaporating water collected in the tank. Therefore saving you the hassle of having to use a drip tray or drainage hose.
Installation WINDOW KIT INSTALLATION The window slider kit has been designed to fit most standard vertical and horizontal window applications, however it may be necessary for you to modify some aspects of the installation procedures for certain types of windows. The window slider kit can be fastened with screws (not supplied) if required. Refer to Fig. 1 & Fig.
Functions POWER Press the POWER button to turn the unit ON or OFF. FUNCTION Press the FUNC button to select between COOL, or DRY modes. COOLING MODE 1. The exhaust hose needs to be installed for this mode. 2. To set this mode, press the FUNC button until the COOL indicator light illuminates on the control panel. 3. Set the target temperature between 17-30°C by pressing the increase (+) or decrease (-) buttons until the desired temperature is displayed on the LED display.
Functions TURBO If TURBO mode is selected, the unit will operate at the highest speed for 30 minutes before changing to AUTO mode. Press the TURBO or FAN SPEED button to cancel this function at any time. If the unit is in TURBO mode, the AUTO icon will be flashing. NOTE: TURBO mode can only be selected from the control panel. SETTING THE TIMER A timer can be set to automatically turn the appliance ON or automatically turn it OFF. To set the unit to automatically turn ON, follow the below instructions: 1.
Functions SWING FUNCTION This unit does not have an automatic-swing function. Please adjust the Horizontal & Vertical louvres by hand until they are in the desired position. NOTE: The unit must be OFF and disconnected from the power outlet when adjusting the louvres.
Error Codes ERROR CODES E1 - Indicates open circuit or short circuit in temperature sensor and PCB. E2 - Indicates open circuit or short circuit in temperature sensor, copper tube and PCB. E4 - Indicates the internal water container is full. Refer to the Water Drainage section below. Overheat Protection - This unit is fitted with an overheat prevention device. If the unit overheats it will automatically turn OFF. The unit can be restarted after 30 minutes.
Remote Control The remote control can be used to perform all functions. Refer to the below diagram and table. 1. Transmitter 2. Display screen 3. Function button 4. Temp increase/decrease buttons 5. Power button 6. Sleep mode button 7. Timer button 8. Auto mode button 9. High speed button 10. Medium speed button 11.
Remote Control Using the Remote Control 1. Open the battery cover of the remote control, and insert 2 x AAA batteries. 2. Please point to the receiver and be within 5m when using the remote control. 3. If the battery voltage is low, please open the battery cover as per the diagram and replace with a new batteries (2 x AAA). Then replace the battery cover.
Cleaning SAFETY PRECAUTIONS • Always unplug the unit before cleaning or servicing. • DO NOT use flammable liquids or chemicals to clean the unit. • DO NOT wash the unit under running water. Doing so causes electrical danger. • DO NOT operate the machine if the power supply was damaged during cleaning. A damaged power cord must be replaced with a new cord from the manufacturer. AIR FILTERS CAUTION: Never operate the unit without a filter in place.
Maintenance Storage If not using the unit for an extended period of time, after cleaning please: • Turn the unit OFF, unplug and take care of the mains lead & plug. • Drain any water from the unit according to the instructions in the following sections. • Run the appliance on FAN MODE for 12 hours in a warm room to dry out and prevent mould. • Clean the air filter as described on the previous page. • Remove the batteries from the remote control.
Customer Care: 1300 556 816 customer.care@glendimplex.com.au www.dimplex.com.au Supplied by Glen Dimplex Australia 1340 Ferntree Gully Road, Scoresby, Victoria, 3179 © Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.
