Product Manual

13
General Functions
only the Day, Time and Type of
clock will be displayed to change.
2. Changing the Time
When you initially go into the set
up menu the and icons for
the time adjustment will be ash-
ing and the optional selected time
setting will appear (ashing).
Using the and icons the time
can be adjusted.
!
NOTE: If the button is held
down for longer the time will in-
crease faster.
By pressing the ashing time set-
ting the time display will change to
match the new setting. I.e. 2:12pm
will change to 14:12.
As soon as any adjustment is
made the icon will appear.
Press the icon to save the
changes and revert back to opera-
tion mode.
!
NOTE: The time can also be
changed by holding down the time
display icon for 3 seconds, but
only the Day, Time and Type of
clock will be displayed to change.
Press the icon to save the
changes and revert back to opera-
tion mode.
3. Changing the Temperature
Measurement Unit
When you initially go into the set
up menu the temperature will
disappear and the temperature
measurement icon will begin to
ash. By pressing the icon it will
toggle between °C and °F.
As soon as any adjustment is
made the icon will appear.
Press the icon save the
changes and revert back to opera-
tion mode.
!
NOTE: The Temperature
Measurement unit can also be
changed by holding down the
temperature setpoint display for 3
seconds, and it will change to the
other Temperature Measurement
unit.
4. Synchronization Function
The controller features CON-
NEX
TM
, a wireless technology that
works with Dimplex CONNEX
TM
enabled heaters to provide simple
whole home connectivity and
comfort. CONNEX
TM
controllers
are available to control one or
multiple heaters within a 50’ (15 m)
radius. In order for the controller to
have this function the CONNEX
TM
enabled heater and the controller