Owner's Manual

13
Operation
WARNING: This electric
heater must be properly installed
before it is used.
The On/Off switch supplies power
to the heater. When the switch is
in the 'I' position, the unit is On,
and will be indicated by the red
light. When the switch is in the
'O' position, the unit is Off.
When connected into a Dimplex
Optimyst Cassette the heater can
by controlled by remote control.
Refer to the cassette user's guide.
HEATER ON POSITION (I)
OFF POSITION (O)
ON POSITION (I)
OFF POSITION (O)
REMOTE CONTROL
POSITION (II)
SWITCH
MAIN ON/OFF
HEATER
EXHAUST
REMOTE CONTROL
SWITCH
Figure 7
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic switch will turn the
heater off and it will not come
back on without being reset. The
temperature cutoff switch can
be reset by unplugging the unit,
waiting 5 minutes and plugging
the unit back in.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
Glen Dimplex Americas at
1-888-346-7539 for technical
support. Please have your
model and serial number ready
when calling.