How to Guide

13
Operation
same functions that it was set
to when it was turned Off and
the intake temperature will
be indicated on the Floating
Display
TM
.
!
NOTE: When any button is
pressed the intake temperature
will be displayed on the Floating
Display
TM
for 5 seconds.
B. Flame Effects
Turns the ame effect On and Off.
→ Activated by pressing the
button on the remote.
C. Heat ON/OFF
Turns the heater On and Off.
→ Activated by pressing the
button on the unit or the re-
mote.
WARNING: This electric re-
box must be properly installed
before it is used.
The unit can be controlled by
either the manual controls which
are located on the upper right of
the replace or the remote (Figure
11 & 12).
The replace is supplied with an
IR multifunction remote control.
!
NOTE: To operate correctly,
the remote control must be point-
ed towards the Floating Display
TM
.
A. Standby
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the
Figure 11
A C
D
E
F
Floating
Display
TM
Figure 12
A
D
B
C
E
G
H
F