Use and Care Manual

17
Operation
Figure 18
 WARNING: This electric
rebox must be properly
installed before it is used.
The unit can be controlled by
either the manual controls which
are located on the upper right of
the replace or the remote (Figure
18 & 19).
The replace is supplied with an
IR multifunction remote control.
!
NOTE: To operate correctly, the
remote control must be pointed
towards the Floating Display
TM
.
A. Standby
Turns the unit on and o󰀨.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned o󰀨 and
the intake temperature will be
indicated on the On-Screen
Display.
!
NOTE: When any button is
pressed the intake temperature
will be displayed on the On-
Screen Display for 5 seconds.
B. Flame E󰀨ects
Turns the ame e󰀨ect on and o󰀨.
→ Activated by pressing the
button on the remote.
Figure 19
A
D
B C
E
G
H
F
A C D E
F
Floating
Display
TM