Installation Guide

L1 FROM UNIT

G FROM

POWER SUPPLY

G FROM UNIT

L1 FROM

POWER SUPPLY

NEUTRAL FROM

UNIT AND SUPPLY

UNIT

WIRE 1 FROM

G FROM UNIT

WIRE 2 FROM

2 CONDUCTOR WIRE

UNIT

FROM HEATER SWITCH

NOTE: This only illustrates

heater switch connection,

see previous sections for

main power connection

instructions.

120V WALL MOUNTED THERMOSTAT

CAUTION: The use of a wall mounted thermostat to control a 240V installa-

tion is not recommended. To control the unit with a thermostat the use of a

Dimplex Wall Remote - WRCPF-KIT - is suggested (sold seperately).

NOTE: Before installing the unit complete the following:

• Install main power connection with appropriate wiring - directly to the

main power or through a wall switch.

• Install a 2 conductor wire with ground (3 wires total) from the thermostat

wall box to the junction box on the unit.

NOTE: Wiring of the thermostat must be completed prior to installing the

FIREPLACE JUNCTION BOX

WALL

THERMOSTAT

RED – 1

GROUND - G

RED – 2