Service manual

5
17.Flame/HeatOn/OffButton*
Press the 17.Flame/HeatOn/Off button to turn the Flame/
Heat function On. When the 2.SetTemperature is higher
then the 1.RoomTemperature the heat will come on. To
turn the heat off, lower the 2.SetTemperature so that it’s
setting is lower then the 1.RoomTemperature. The default
temperature setting is 72°F (22°C).
!
NOTE:When using the remote control the heater runs
on a thermostat. Press the 8.TemperatureUp or 7.
TemperatureDown button to adjust the set temperature.
Once the desired set temperature is reached the heater
will turn Off. The heater will cycle On and Off to maintain
the desired set temperature.
ChildLock(Figure 4)
1. Depress tab on the battery cover on the back of the
remote transmitter and remove the battery cover.
2. Move Child Lock tab to the right to lock the remote
transmitter.
3. Move Child Lock tab back to the left to unlock the remote
transmitter.
4. Replace the battery cover.
!
NOTE:To temporarily unlock the remote transmitter
press (in order) 7.TemperatureDown then 8.
TemperatureUp then 9.DimmerDown.
When the remote transmitter’s backlight is illuminated the
Child Lock is bypassed. When the backlight is off the Child
Lock is re-activated.
Unlocked Locked
Child Lock Switch
Child
Lock
Figure 4