Operation Manual

Dimension BST 768 / SST 768 User Guide
Maintenance 51
Figure 17: Lead Screw and Guide Rod Identification
As Needed Maintenance
The following maintenance items have no routine schedule but
should be tended to as needed.
Remove Debris Buildup
Remove all material buildup on the Z Platform and around the lead
screw (See “Lead Screw and Guide Rod Identification” on
page 51.). Failure to do so could cause the base to become unlevel
or the Z Platform to jam at its upper limit.
Vacuum Build Chamber
Vacuum the build chamber to remove all foreign particles and
purged material.
Clean Door Glass
The door glass can be cleaned with any commercial glass cleaner.
Y-axis Guide
Rod (1 of 2)
Z-axis Lead
Screw
X-axis Guide
Rods
Z-axis Guide
Rods