Operation Manual

58 Maintenance
Dimension BST 1200 / SST 1200 User Guide
C. Read the number closest to this location. This is the
required X Tip Offset adjustment, in mils. If the number is
on the -X side, a negative offset is required.
D. Select Increment or Decrement to input the X offset
adjustment - the value will change in the upper display
window (by default, the printer will be ready to accept the X
value).
E. When you are satisfied with your X offset value, Select Y
and repeat the procedure to identify and input the required
Y Tip Offset adjustment.
4. Select Done after you have input the X and Y offsets. The
printer will return to Maintenance.
Figure 25: Example XY Tip Offset Part.
This example requires an adjustment of X = + 2 mils, Y = - 4 mils