Product Info

OTDR

5.3.1 Laser

Click off on the laser interface to open the laser. Click“ γ” The wavelength type

(1310nm, 1550nm) can be switched. Click "CW" to switch the laser emission mode.

When this function is not used, it should be set to off. Otherwise, when entering

other interfaces, the laser still emits laser (when OTDR function test is carried out,

the light source will be turned off automatically); Click the options after the mode:

CW, 270Hz flashing (1Hz), 1kHz flashing (1Hz), 2KHz flashing (1Hz), and you can

select the corresponding laser emission mode. (When selecting different modes or

different wavelengths, first select off at the wavelength, and then select the

corresponding wavelength)

Figure 6-4 laser interface