Product Info

OTDR
61
Figure 5.2-4 OTDR Duration selection interface
Figure 5.2-5 OTDR Setting interface
5. After selecting conventional parameters, click the exit button in the upper right
corner to exit the setting page, and then click "start measurement" in the OTDR
interface or click the physical measurement button above the equipment to start
the test.
6. After starting the measurement, there will be corresponding prompt on the
OTDR interface, indicating that the equipment is in the process of measurement.
You can observe the "measuring..." on the main interface ，And the timer behind
Sys setting to judge whether the measurement is completed. Wait for the timer
above the device to zero and the "measuring..." prompt disappears, indicating that
the measurement is completed.